Adhesive marking films for the visualization of glazing
Adaptive design - functional signage
Protect people from the risks of impact on glazing
The marking for the visualization of glazing applies to the accessibility of establishments receiving the public, installations open to the public and residential buildings.
Consequently, doors with a large glazed part must be visible both open and closed. Glass walls located on paths or on the immediate edge must be identifiable by people of all sizes.
The visualization of the glazing is ensured by visual elements contrasting with the immediate environment and visible on either side of the glass wall without creating any visual disturbance.
In order to comply with legislation regarding the safety of passers-by,
adhesive window marking films are a simple and inexpensive way
of indicating the presence of large glass surfaces.
Find the adhesive films for marking the visualization of glazing
Prevention against accidental impacts on glazing
Installation of visuals on glass surfaces
A possible recommendation is to apply two frosted strips of +/- 5cm width located at 1.10m and 1.60m height. Beyond the standard patterns, it is possible to use personalized visuals to allow the visualization of the glazing.
The visuals installed are intended to indicate the presence of a glass surface. It is therefore possible to use personalized elements such as logos or specific window stickers.
The aim is to signal the presence of a glass wall over its entire width to any person according to their size in order to prevent them from hitting this wall.